Road
Road Safety Annual Report 2016
IRTAD, Policy Insights,
14 July 2016
- Focus road safety policy on vulnerable road users.
- Enforce drink driving laws, speed limits and the wearing of seat belts and motorcycle helmets.
- Analyse the reasons behind the relatively poor road safety performance in 2015 and adapt policies.
Regulation of For-Hire Passenger Transport: Portugal in International Comparison
Case-Specific Policy Analysis, Policy Insights,
9 June 2016
- Steer policy development towards mobility services that allow efficient achievement of public policy objectives regarding the needs of consumers and society.
- Encourage innovative and more flexible regulation of for-hire transport services.
- Embrace data-led regulation to improve societal outcomes.
- Keep the regulatory framework of for-hire passenger transport services as simple and uniform as possible.
App-Based Ride and Taxi Services: Principles for Regulation
Corporate Partnership Board Report, Policy Insights,
9 May 2016
- Focus policy regarding for-hire passenger transport on the needs of consumers and society.
- Keep the regulation framework of for-hire passenger transport services as simple and uniform as possible.
- Encourage innovative and more flexible regulation of for-hire transport services.
- Embrace data-led regulation to improve societal outcomes.
Shared Mobility: Innovation for Liveable Cities
Corporate Partnership Board Report, Policy Insights,
9 May 2016
- Shared mobility benefits depend on creating the right market conditions and operational frameworks.
- Shared mobility has significant environmental benefits, even with current engine technology.
- Shared mobility will radically change public transport and most traditional bus services will disappear.
- Public authorities must guide the deployment of shared mobility systems and anticipate their impacts.
Improving Safety for Motorcycle, Scooter and Moped Riders
Research Report, Policy Insights,
7 October 2015
- The powered two-wheeler population is increasing and plays a significant role in mobility.
- Powered two-wheeler (PTW) riders are at far greater risk than car drivers.
- Poor perception and control are frequent failures that lead to PTW crashes.
- A Safe System approach is required to improve the safety of PTWs.
- The helmet is the most important source of protection against severe injuries and death.
- Advances in car technology can also bring positive safety benefits to PTW users. There are a number of new technologies, such as forward collision warning, blind spot information and vulnerable road user protection systems, which can prevent collisions, including those with PTW riders, pedestrians and cyclists.
Road Infrastructure Safety Management
IRTAD, Policy Insights,
6 October 2015
- Benchmark road infrastructure against good practices in other countries.
- Implement new minimum safety standards for road infrastructure.
- Continue evaluation and research to quantify safety impacts of planning decisions.
- Implement suitable Road Infrastructure Safety Management procedures for each stage of road development including planning design, pre-opening and full operation.
- Make Road Infrastructure Safety Management procedures legally binding.
- Involve both road and health authorities when developing road accident data bases.
- Assure adequate institutional management capacity and investment levels.
- Use existing tools and guidelines; adopt second-best solutions where state-of-the-art solutions are not feasible.
- Identify the Road Safety Infrastructure Management procedures that fit specific needs and understand barriers to implementation.
- Share good practices of Road infrastructure Safety Management procedures and intervention measures.
- Monitor the safety performance of road infrastructure.
- Develop self-explaining roads.
Why Does Road Safety Improve When Economic Times Are Hard?
IRTAD, Policy Insights,
5 October 2015
- There is clear evidence that when economic growth declines, and particularly when unemployment increases, road safety improves.
- The financial and economic crises which started in 2007 were accompanied by marked falls in annual numbers of road deaths in most OECD countries.
- It is important to understand how much of the accelerated reduction in numbers of deaths during the downturn that began in 2008 was attributable to the changed economic conditions.
- The economic downturn in 2009-10 may well have contributed to about two-thirds of the decrease in fatalities from 2008.
- The recent downturn has had repercussions on the Gross Domestic Product (GDP) and unemployment rate and has influenced the number of road deaths through a reduction in vehicle kilometres driven, especially by young men and by heavy goods vehicles, a reduction in speeding and in drink-driving, and a reduction in learning to drive by young men.
- Policy makers need to take careful account of these results when setting road safety targets and when designing road safety strategies for the future.
Automated and Autonomous Driving
Corporate Partnership Board Report, Policy Insights,
30 April 2015
- Automated driving comprises a diverse set of emerging concepts that must be understood individually and as part of broader trends toward automation and connectivity
- Uncertainty on market deployment strategies and pathways to automation complicates the regulatory task
- Incrementally shifting the driving task from humans to machines will require changes in insurance
- The shift from human to machine may have an impact on what product information developers and manufacturers of autonomous vehicles share, and with whom
- Regulators and developers should actively plan to minimise legacy risks
Model of ECMT Certificate of Compliance of a Trailer of TPLW not Exceeding 3.5 Tonnes with the Technical Safety Requirements
Guidelines/User Guide,
1 January 2015
Model of Certificate of Compliance with Technical Provisions Concerning Exhaust and Noise Emissions and Safety Requirements for “EURO IV/4 Safe", "EURO V/5 Safe", "EEV Safe" or "EURO VI/6 Safe" Motor Vehicle (Lorry) of TPLW above 3.5 and not Exceeding 6 T
Guidelines/User Guide,
1 January 2015
КОНТРОЛЬНЫЕ ПРОЦЕДУРЫ для грузовиков с МРГВ свыше 3,5 тонн и не более 6 тонн начиная с 1 января 2015 года
Guidelines/User Guide,
1 January 2015
Control Procedures for Vehicles with TPLW above 3.5 and not Exceeding 6 Tonnes as from 1 January 2015
Guidelines/User Guide,
1 January 2015
Дополнительная Информация К Статье 3.16 Руководства Пользователя Многосторонней Квотой ЕКМТ, 2014
Guidelines/User Guide,
1 January 2014
Дополнительная Информация к Руководству пользователя Многосторонней квотой ЕКМТ
Guidelines/User Guide,
1 January 2014
Article 3.15 and 3.16 – Provision Relating to Transit Through the Country of Registration
Guidelines/User Guide,
1 January 2014
Complementary Information to Article 3.16 of the User Guide on ECMT Multilateral Quota, 2014 and Control Procedures for Vehicles with tplw from 3.5 to 6 tonnes as from 1 January 2014
Guidelines/User Guide,
1 January 2014
The Model Certificate of Roadworthiness Test for Motor Vehicles and Trailers
Guidelines/User Guide,
1 January 2014
Model Certificate of Compliance of a Trailer with the Technical Safety Requirements
Guidelines/User Guide,
1 January 2014
Cycling, Health and Safety
Research Report, Policy Insights,
19 December 2013
- Insufficient evidence supports causality for the “safety in numbers” phenomenon – policies increasing the number of cyclists should be accompanied by risk-reduction actions.
- Efforts must be made to harmonise definitions of bicycle accident terminology so as to be able to make reliable international comparisons on cyclist safety.
- National authorities should set standards for, collect or otherwise facilitate the collection of data on non-fatal cycling crashes based on police reports and, in either a systematic or periodic way, on hospital records.
- Authorities seeking to improve cyclists’ safety should adopt the Safe System approach - policy should focus on improving the inherent safety of the traffic system, not simply on securing marginal improvements for cyclists in an inherently unsafe system.
- Authorities should establish top-level plans for cycling and cycling safety and should ensure high-level coordination among relevant government agencies to ensure that cycling grows without aggravating safety performance.
- Speed management acts as “hidden infrastructure” protecting cyclists and should be included as an integral part of cycle safety strategies.
- Cyclists should not be the only target of cycling safety policies – motorists are at least as important to target.
- Where appropriate, traffic speeds should be limited to less than 30km/hr where bicycles and motorised traffic mix but care should be taken so that speed control devices do not create hazards for cyclists.
Model of Certificate of Compliance with Technical Provisions Concerning Exhaust and Noise Emissions and Safety Requirements for “EURO IV Safe", "EURO V safe", "EEV Safe" or "EURO VI Safe" Motor Vehicle
Guidelines/User Guide,
1 December 2012
Sharing Road Safety: Developing an International Framework for Crash Modification Functions
Research Report, Policy Insights,
1 December 2012
- Road safety policies should undergo performance and efficiency evaluations. Such evaluations cannot be undertaken without Crash Modification Functions (CMFs). Evaluation processes should be documented to ensure they are transparent.
- Research conducted to develop CMFs should follow the guidance provided in this report and, in particular, provide specific information that describes the countermeasure under consideration, the safety issue being addressed and the roadway environment in which it was tested.
- It is recommended that an international group be composed under an existing organization (e.g. Transportation Research Board, World Road Association, etc.) to foster dialog among researchers and practitioners on CMF research and reporting standards with the aim of increasing transferability of results. Coordination of research across countries on top priority countermeasures should be considered.
- International cooperation should aim to capture documentation and reporting of CMF research in a widely available transnational database.
- A concerted effort should be made to publicize the benefits of decision-making based on CMFs. This should take the form of: presentations and workshops at transport, injury prevention and health conferences; press releases; letters to political leaders and senior bureaucrats.